Choosing a display rack looks simple until the first container arrives with racks that are too deep for the aisle, too weak for the stock, or too tall to see over. This checklist covers the points that decide whether a display fixture works in a real store.
Start with the product, not the rack
Write down what will sit on the fixture: the unit weight, the pack size, how many facings you want and whether the product is boxed or loose. A rack for greeting cards, for example, needs shallow pockets and a low centre of gravity; a rack for drinks or hardware needs deeper shelves and a much higher load rating. The product decides the rack, not the other way round.
Measure the footprint before you choose
Two numbers matter more than any other: the floor area the fixture occupies and the sightline it creates. A 450 mm deep rack in a 900 mm aisle leaves enough room for two shoppers to pass. A 600 mm deep rack in the same aisle blocks the store. Height matters as well: fixtures above 1.6 m hide the wall behind them, which is fine in a corner and wasteful in the middle of a sales floor.
Check the load capacity honestly
Most wire racks sold for retail use are rated at 20–40 kg per shelf. Multiply that by the number of shelves and compare it with the real weight of your stock, including packaging. If the number is close, choose a heavier gauge wire or add a centre support. A shelf that bows under load is the most common reason a cheap fixture ends up in the skip within a year.
Pick the finish that matches the environment
Chrome and zinc plating suit dry, indoor retail and give a bright, clean look. Powder coating in a specific colour is the usual choice when the fixture has to match a brand palette, and it hides scratches better than plating. For humid or coastal locations, ask for a powder coat over a pre-treated surface rather than bright chrome, which will pit.
Decide how much adjustability you need
Fixed shelves are cheaper and stronger. Adjustable shelves cost a little more but let you change the layout when the assortment changes, which happens faster than most store plans assume. A practical compromise is adjustable shelves on the main body of the rack and fixed shelves at the base, where the load is heaviest.
Do not ignore packaging and assembly
Ask how the rack ships: flat-packed or assembled, one carton or several, and whether the hardware is bagged per unit. Flat-packed fixtures cut freight cost sharply but add assembly time in the store. For multi-store rollouts, pre-assembled units are often cheaper overall once labour is counted. Always request the carton dimensions and gross weight before booking freight.
MOQ, samples and lead time
For custom sizes and colours, most factories ask for a minimum order quantity per model, typically in the range of 100 to 300 units depending on the process. A sample order is worth the cost: it confirms the wire gauge, the finish colour and the stability of the base before you commit to a full run. Standard production lead time is usually 25–35 days after sample approval, plus sea freight.
A quick checklist
- Unit weight and total load per shelf, including packaging
- Footprint and aisle width, plus overall height
- Shelf depth and number of facings
- Finish: chrome, zinc, powder coat, and the colour reference
- Fixed or adjustable shelves, and the pitch between positions
- Carton size, gross weight and assembly method
- MOQ, sample cost and production lead time
If you send us the product dimensions and a photo of the store area, our engineering team will propose two or three fixture options with load ratings and a quotation, usually within one working day.
