Wire Display Stands — Welded Metal Wire Fixtures

Wire display stands let a shopper see the product from every side, which is why they dominate greeting cards, phone accessories, eyewear and souvenir retail. We weld them in-house from 3–6 mm steel wire, then powder coat in any RAL colour on our own line.

Wire gauge, hook spacing, pocket depth and base weight are all made to your product — not to a catalogue.

Wire Formats

Wire Stand Types

Four constructions cover most wire display needs; all can be combined in one fixture.

◌

Wire Counter Stands

Compact welded stands for till points — 30–60 cm tall, 5–15 kg per shelf.

◍

Wire Floor Spinners

Two- to four-sided rotating wire racks with a bearing base and castors.

▦

Wire Grid Panels

Welded gridwall panels and floor grids for hanging carded products.

◲

Wire Baskets & Bins

Dump bins, nesting baskets and hinged-lid bins in welded wire mesh.

Product Selection

Popular Wire Display Stands Models

Welded wire fixtures from current production. Wire gauge, spacing and finish are all made to your drawing.

Browse The Full Range Ask For A Quote

Wellshow factory producing wire display stands
Capability

Welded On Jigs, Not By Eye

Wire stands look simple until the fourth one is 5 mm out of square. We bend wire on CNC benders and weld on fixtures, so hook pitch and pocket size repeat exactly — which matters when a retailer orders the same stand for 300 stores.

  • ✓ Wire 3–6 mm, welded on fixtures for repeatable pitch
  • ✓ Automatic powder coating line — any RAL colour
  • ✓ Load tested 5–15 kg per shelf (counter) to 40 kg (floor)
  • ✓ Chrome, zinc, brass-look and wood-look finishes
  • ✓ Logo by silkscreen, UV print or a die-cut header card
Inside Our Factory
Specifications

Standard Options for Wire Display Stands

These are the ranges we work with every week — tell us your target price and we will propose the most economical construction that still does the job.

ItemStandard rangeNotes
Wire3 / 4 / 5 / 6 mm round wire · flat wire on requestStainless wire for outdoor or humid use
ConstructionWelded joints, no screws in the load pathKnock-down versions for lower freight
Load capacity5–15 kg per shelf counter · 15–40 kg floorHigher with cross bracing or tube frame
FinishPowder coating in any RAL · chrome · zinc · brass-lookSalt-spray tested coating
DimensionsMade to your product size and pocket depthWe can work from a photo and a ruler
Minimum order100 pcs per model (stock tooling) · 300 pcs (new tooling)Mixed colours from 300 pcs
Sampling7–12 days for a pre-production sampleSample cost refunded on the bulk order
Lead time25–35 days after sample approvalAug–Oct may need +7 days
PackingFlat-pack or assembled · foam interleaves · 5-ply cartonRetail-ready or FBA prep available
Applications

Where Buyers Use Wire Display Stands

💳

Cards & Phone Accessories

Pocket stands at the till for impulse items.

🕶

Optical & Eyewear

Wire racks with padded slots for frames.

🎁

Gift & Souvenir

Spinning wire stands for magnets and keyrings.

💊

Pharmacy

Wire shelves and bins for ventilated stock.

FAQ

Wire Display Stand Buyers' Questions

Straight answers to what buyers usually ask before ordering.

How thick should the wire be for my product?

3–4 mm suits carded accessories and greeting cards, 5 mm suits small bottles and hardware, and 6 mm is used for floor stands carrying 30 kg or more. We size the wire against the load and the span rather than defaulting to one gauge.

Will the powder coating chip in transit?

Our coating line pre-treats with a phosphate wash and cures at 200 °C, which gives 60–80 µm of film and passes a 1 mm cross-hatch test. For long sea freight we add foam interleaves and corner protectors.

Can the stand be knocked down for cheaper freight?

Yes. Most of our wire stands have a knock-down version with bolt-together uprights — freight volume drops by 50–65% at the cost of a few minutes of assembly at the store.

Can you match a stand I already buy from another supplier?

Yes. Send one sample or clear photos with dimensions and we will reverse-engineer it, then quote both an identical copy and a cost-reduced version — usually 10–20% cheaper by simplifying joints.

Do you offer chrome or gold finishes?

Yes: chrome plating, zinc plating and brass-look powder are all available. Chrome adds 3–5 days to production and costs more than powder coating, so we will quote both so you can compare.

Not sure which model fits your shop? Send a photo of the shelf or floor area and we will recommend the right fixture — contact our sales team.

Need a quotation for display stands?

Send your size, load and finish requirements — we reply with pricing and drawings within 24 hours.