Greeting Card Display Stands — Pocket Racks for Cards & Postcards

Card retail lives or dies on pocket size. Too tight and the card buckles; too loose and it slides down behind the pocket. We build card stands around your actual card sizes — A2, A6, 5×7 inch or square — with pocket depth, tier pitch and face count matched to the range you carry.

Wire, sheet steel or a mixed construction, in any RAL colour, with optional dividers so birthday, seasonal and everyday cards stay separated.

Card Stand Types

Card & Postcard Display Formats

Every format is dimensioned from the cards you sell, not from a standard pocket.

▤

Pocket Card Stands

Tiered counter or floor stands with welded wire pockets sized to your card format.

⟳

Spinning Card Racks

Three- and four-sided rotating card racks for compact floor footprints.

▥

Wall-Mount Card Racks

Wall panels and grid racks that free up counter and floor space.

✉

Postcard & Sticker Stands

Shallow-pocket stands for postcards, stickers and small prints.

Product Selection

Popular Greeting Card Display Stands Models

Card fixtures from current production. Pocket dimensions are made to your card size on every order.

Browse The Full Range Ask For A Quote

Wellshow factory producing greeting card display stands
Capability

Built Around Your Card Format

We ask three questions before quoting: card height and width, how many designs per pocket, and whether the stand must hold seasonal and everyday ranges separately. Pocket depth, tier pitch and divider positions follow from those answers — which is why our card stands do not sag or swallow the card.

  • ✓ Pocket sizes to A2, A6, 5×7 in, 6×6 in and custom square formats
  • ✓ Wire 3–4 mm pockets with a front lip so cards stay upright
  • ✓ Optional dividers and header card holders for seasonal ranges
  • ✓ Load tested 5–15 kg per tier; base weighted for tall units
  • ✓ Any RAL colour, with logo printed on the header or base
Inside Our Factory
Specifications

Standard Options for Greeting Card Display Stands

These are the ranges we work with every week — tell us your target price and we will propose the most economical construction that still does the job.

ItemStandard rangeNotes
Pocket sizeMade to your card format (A2–A6, 5×7, square)Send one sample card and we measure it
Pocket construction3–4 mm wire with front lip · sheet steel channelDepth 8–25 mm depending on card stack
Tiers3–8 tiers counter · 6–16 tiers floorTier pitch adjusted to card height
Faces1-sided wall or counter · 2–4 sided spinnerMixed pocket sizes possible
Load capacity5–15 kg per tier · base weighted for tall unitsHeavier base for 16-tier floor units
FinishAny RAL powder colour · chrome · zincSalt-spray tested coating
Minimum order100 pcs per model (stock tooling) · 300 pcs (new tooling)Mixed colours from 300 pcs
Sampling7–12 days, tested with your own cardsSample cost refunded on the bulk order
Lead time25–35 days after sample approvalAug–Oct may need +7 days
PackingKnock-down · foam interleaves · 5-ply export cartonFBA prep available
Applications

Where Buyers Use Greeting Card Display Stands

💌

Card & Gift Shops

Multi-tier floor racks for full seasonal ranges.

🛒

Supermarkets

Counter pocket stands near the till.

🖼

Museums & Galleries

Postcard and print stands with shallow pockets.

📚

Bookshops

Wall-mount card racks alongside stationery.

FAQ

Card Display Buyers' Questions

Straight answers to what buyers usually ask before ordering.

Can you make the pockets fit my exact card size?

Yes — that is the whole point of a custom card stand. Send one sample card of each format you sell and we size the pocket with 2–3 mm clearance plus a front lip so the card stands upright without bowing.

How many cards should one pocket hold?

Typically 15–25 cards per pocket for a 25 mm deep pocket. If you want a deeper stack we increase the pocket depth and add a spring or a back-tilt so the front card stays visible.

Can I separate seasonal and everyday cards?

Yes. We weld dividers at the positions you specify and can add a small header holder above each section, so birthday, Christmas and everyday ranges stay visually separate.

Do you also make the cardboard header?

Yes. We print die-cut headers with your artwork and fit them to the stand, so the unit arrives retail-ready. Artwork in AI, PDF or CDR at 300 dpi.

What is the lead time?

Sampling 7–12 days with your own cards, production 25–35 days after sample approval. Express 20-day production is possible for seasonal deadlines if you confirm early.

Not sure which model fits your shop? Send a photo of the shelf or floor area and we will recommend the right fixture — contact our sales team.

Need a quotation for display stands?

Send your size, load and finish requirements — we reply with pricing and drawings within 24 hours.