Souvenir Store Display Racks — Gift Shop Fixtures
Souvenir shops sell small, light, high-margin items — magnets, postcards, keyrings, pins — and they sell them from very little floor space. The fixture has to pack 60–200 SKUs into a two-metre footprint and still let a tourist find the right city in ten seconds.
We build spinning souvenir racks, postcard stands, keyring hook units and counter gift stands, with pockets and hooks laid out to your product mix.
Gift & Souvenir Display Formats
Four formats cover most souvenir shops; pockets and hooks are laid out to your SKU list.
Spinning Souvenir Racks
Four-sided floor spinners with mixed pockets for magnets, pins and small gifts.
Postcard & Magnet Stands
Shallow-pocket stands sized for postcards, prints and fridge magnets.
Keyring Hook Racks
Multi-hook panels and spinners for keyrings, badges and small carded items.
Counter Gift Stands
Compact till-point stands for impulse souvenirs and local specialities.
Popular Souvenir Store Display Racks Models
Souvenir and gift fixtures from current production. Pocket and hook layout follows your SKU list.
64 pockets wire frame holder universal greeting card spinning display rack(PH2313D)
Model: PH2313D
Laid Out Around Your SKU Mix
A souvenir rack works when the layout matches the product: deep pockets for magnets, shallow lips for postcards, hooks at 25 mm pitch for keyrings. We take your SKU list, propose a layout, then build a sample with your actual products in it before production.
- ✓ Mixed pocket and hook layouts on one rack
- ✓ Pocket depth 8–40 mm, hook pitch 25 / 50 mm
- ✓ 4-sided spinners with sealed bearing and weighted base
- ✓ Any RAL colour, with a city or store header
- ✓ Sample built with your own products before production
Standard Options for Souvenir Store Display Racks
These are the ranges we work with every week — tell us your target price and we will propose the most economical construction that still does the job.
| Item | Standard range | Notes |
|---|---|---|
| Layout | Mixed pockets and hooks per face, to your SKU list | Planogram drawn before sampling |
| Pocket depth | 8–40 mm depending on product thickness | Front lip keeps cards and magnets upright |
| Hook pitch | 25 mm or 50 mm, wire 3–5 mm | Euro hook or single hook options |
| Faces / tiers | 2–4 faces · 4–12 tiers | Counter and floor heights available |
| Load capacity | 15–40 kg total for floor spinners | Weighted base for tall units |
| Finish | Any RAL powder colour · chrome · zinc | Salt-spray tested coating |
| Minimum order | 100 pcs per model (stock tooling) · 300 pcs (new tooling) | Mixed colours from 300 pcs |
| Sampling | 7–12 days, built with your products | Sample cost refunded on the bulk order |
| Lead time | 25–35 days after sample approval | Aug–Oct may need +7 days |
| Packing | Knock-down · foam interleaves · 5-ply export carton | FBA prep available |
Where Buyers Use Souvenir Store Display Racks
Souvenir & Gift Shops
Entrance spinners for magnets and postcards.
Museums & Attractions
Postcard and print stands at exit points.
Airport & Travel Retail
Compact spinners for high-traffic kiosks.
Hotels & Resorts
Counter stands for local specialities.
Souvenir Rack Buyers' Questions
Straight answers to what buyers usually ask before ordering.
Can one rack hold magnets, postcards and keyrings together?
Yes, and that is the most common souvenir build: deep pockets on two faces for magnets, shallow lips on one face for postcards, and a hook panel on the fourth for keyrings. Send your SKU list with product sizes and we will lay it out.
How many SKUs fit on one spinning rack?
A 160 cm four-sided rack with mixed pockets typically holds 120–200 SKUs. Density comes from tier count and pocket width, so tell us how many designs you carry and we will size the rack to fit them without crowding.
Is the rack stable in a busy shop?
Yes. Floor spinners use a weighted base sized against the loaded height — typically 45×45 cm for a 160 cm rack. For very tight footprints we lower the height rather than shrink the base.
Can I print a city name or store logo?
Yes. Headers, base plates and side panels can be printed or fitted with a metal nameplate — common for museum and attraction shops that want a branded header.
What is the minimum order and lead time?
100 pieces per model with existing tooling, 300 for new tooling. Sampling 7–12 days with your own products, production 25–35 days after sample approval.
Not sure which model fits your shop? Send a photo of the shelf or floor area and we will recommend the right fixture — contact our sales team.
Explore Our Other Product Lines
Need a quotation for display stands?
Send your size, load and finish requirements — we reply with pricing and drawings within 24 hours.
